Products
Product
Product Category
Automobile front combination lamp assembly inspection fixture
Method:
CNC Machining
Materials:
Alloy aluminum
Treatment:
Heat treatment
Cycle:
35 days
product introduction
The automobile front combination lamp inspection tool detects the contour and surface difference of the headlight, with an overall dimension of 800*590*440mm and a weight of 63kg. The overturning mechanism on the checking fixture is a rotary analog block; the locking pin detects the position of the product hole.
Product installation steps
1. Open the turning mechanism and pull the movable block of the guide rail.
2. Place the product on the inspection fixture to make the product fit with the positioning surface on the positioning block/support surface; Then push the movable positioning block into the positioning position, insert the locking detection pin into the corresponding hole, and lock it to complete the positioning of the product.
3. After the product positioning is determined to be stable, rotate the turning mechanism to the detection position to make the product in a state to be detected.
Detection
1. Contour detection: Use clearance ruler or stop gauge to measure the 3mm clearance surface as required.
2. Face difference detection: use face difference gauge or face difference gauge to measure the face difference of the product as required.
Keyword:
Company address: No.19, Chaqian Road, Science and Technology Park, Changping District, Beijing
Address: Renyi Park, Xin 'an Town, Bazhou City, Langfang City, Hebei Province
tictoc
